Miller Cool Runner 3CS Kullanıcı El Kitabı - Sayfa 16
Kaynak Sistemi Miller Cool Runner 3CS için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Cool Runner 3CS 24 sayfaları.
Ayrıca Miller Cool Runner 3CS için: Kullanıcı El Kitabı (20 sayfalar)
Sayfayı Yazdır
SECTION 7 − MAINTENANCE & TROUBLESHOOTING
7-1. Routine Maintenance
NOTICE − Clean coolant strainer. Severe condi-
tions may require more frequent cleaning (contin-
uous use, high/low temperatures, dirty environ-
ment, etc.). Failure to properly clean coolant
strainer voids pump warranty.
Replace
Cracked
Hoses
7-2. Coolant Maintenance
OM-230161 Page 12
!
Turn Off all power and unplug unit before maintaining.
1 Month
6 Months
Change
Coolant (If
Using Water)
12 Months
Change
Coolant (If
Using Miller
Coolant)
2
!
Disconnect cooler plug from
welding power source receptacle
before maintaining.
!
Dispose of used coolant accord-
ing to national, state, and local
codes. Do not pour down drain.
1
Cooler Front Panel
2
Coolant Filter
Unscrew housing to clean filter and
housing.
Changing Coolant
Drain coolant by tipping unit forward. Fill
with clean water and run for 10 minutes.
Drain and refill.
NOTICE − If replacing hoses, use hoses
compatible with ethylene glycol, such as
Buna-n,
Neoprene,
Oxy-acetylene hoses are not compati-
1
ble with any product containing ethylene
glycol.
Blow Out Heat
Exchanger Fins
Replace
Unreadable
Labels
or
Hypalon.
805516-A / Coolant 2016-08