Miller Cool Runner 3CS 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Miller Cool Runner 3CS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Cool Runner 3CS 24 페이지.
Miller Cool Runner 3CS에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

페이지 인쇄

SECTION 7 − MAINTENANCE & TROUBLESHOOTING

7-1. Routine Maintenance

NOTICE − Clean coolant strainer. Severe condi-

tions may require more frequent cleaning (contin-

uous use, high/low temperatures, dirty environ-

ment, etc.). Failure to properly clean coolant

strainer voids pump warranty.

Replace

Cracked

Hoses

7-2. Coolant Maintenance

OM-230161 Page 12

Turn Off all power and unplug unit before maintaining.

1 Month

6 Months

Change

Coolant (If

Using Water)

12 Months

Change

Coolant (If

Using Miller

Coolant)

Disconnect cooler plug from

welding power source receptacle

before maintaining.

Dispose of used coolant accord-

ing to national, state, and local

codes. Do not pour down drain.

Cooler Front Panel

Coolant Filter

Unscrew housing to clean filter and

housing.

Changing Coolant

Drain coolant by tipping unit forward. Fill

with clean water and run for 10 minutes.

Drain and refill.

NOTICE − If replacing hoses, use hoses

compatible with ethylene glycol, such as

Buna-n,

Neoprene,

Oxy-acetylene hoses are not compati-

ble with any product containing ethylene

glycol.

Blow Out Heat

Exchanger Fins

Replace

Unreadable

Labels

Hypalon.

805516-A / Coolant 2016-08