Miller Cool Runner 3CS 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Miller Cool Runner 3CS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Cool Runner 3CS 24 페이지.
Miller Cool Runner 3CS에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

페이지 인쇄

6-1. Operation

Front Of Cooling Unit

Tools Needed:

11/16 in.

OM-230161 Page 10

SECTION 6 − OPERATION

4 or

Coolant Tank Cap

Coolant In Fitting

Coolant Hose (Customer Supplied -

Not Required On All Models)

TIG Block Or International Style Water

Adapter (Customer Supplied - Varies

By Model)

Connect coolant hose between Coolant In fit-

ting and TIG block located on welding power

source Electrode weld output terminal, or

connect international style water adapter to

Electrode weld output terminal and adapter

water hose to Coolant In fitting.

Coolant Out Fitting

Connect hoses between cooling unit and

torch cable/TIG block coolant fittings.

NOTICE − If welding power source has a wa-

ter valve, do not connect hoses to water

valve.

See Section 6 to select proper coolant, and fill

tank. Keep coolant level full.

Operation:

Flowmeter

To turn cooling unit On, connect power cord

to welding power source 115 volts ac recep-

tacle. Unplug to turn unit Off.

Flow indicator spins to indicate that at least

1.1 qt/min (1.0 L/min) of coolant is flowing.

805102-B / 805517-A