Miller Cool Runner 3CS Посібник користувача - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система Miller Cool Runner 3CS. Miller Cool Runner 3CS 24 сторінки.
Також для Miller Cool Runner 3CS: Посібник користувача (20 сторінок)
Друкувати сторінку
6-1. Operation
1
Front Of Cooling Unit
Tools Needed:
11/16 in.
OM-230161 Page 10
SECTION 6 − OPERATION
4 or
3
2
6
1
Coolant Tank Cap
2
Coolant In Fitting
3
Coolant Hose (Customer Supplied -
Not Required On All Models)
4
TIG Block Or International Style Water
Adapter (Customer Supplied - Varies
By Model)
Connect coolant hose between Coolant In fit-
ting and TIG block located on welding power
source Electrode weld output terminal, or
connect international style water adapter to
Electrode weld output terminal and adapter
water hose to Coolant In fitting.
5
Coolant Out Fitting
Connect hoses between cooling unit and
torch cable/TIG block coolant fittings.
NOTICE − If welding power source has a wa-
ter valve, do not connect hoses to water
valve.
See Section 6 to select proper coolant, and fill
tank. Keep coolant level full.
Operation:
6
Flowmeter
To turn cooling unit On, connect power cord
to welding power source 115 volts ac recep-
tacle. Unplug to turn unit Off.
Flow indicator spins to indicate that at least
1.1 qt/min (1.0 L/min) of coolant is flowing.
5
805102-B / 805517-A