Miller CST 282 Kullanıcı El Kitabı - Sayfa 21
Kaynak Sistemi Miller CST 282 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller CST 282 42 sayfaları.
Sayfayı Yazdır
5-4.
Weld Output Terminals
1
2
5-5.
TIG Lift-Arc DCEN (Direct Current Electrode Negative) Connections
1
7
11/16 in., 1-1/8 in., (21mm)
wrench
crescent wrench
�
Complete Parts List is available at www.MillerWelds.com
output term1 2015−02
2
1 Positive (+) Weld Output Terminal
2 Negative (−) Weld Output Terminal
�
1 Positive (+) Weld Output Terminal
4
5
Connect work lead to positive weld output
6
terminal.
2 Negative (−) Weld Output Terminal
Connect TIG torch to negative weld output
3
terminal.
3 Gas Cylinder
4 Cylinder Valve
Open valve slightly so gas flow blows dirt
from valve. Close valve.
5 Regulator/Flowmeter
6 Flow Adjust
Typical flow rate is 15 cubic feet per hour
(7.1 liters per minute).
Connect torch gas hose to regulator/
flowmeter.
7 7 Gas Valve
803 943-A
Valve controls gas preflow and postflow.
Open valve on torch just before welding.
Turn off power before connecting
to weld output terminals.
Do not use worn, damaged, under-
sized, or repaired cables.
For welding output terminal connec-
tions see Section 5-5 and 5-6 for typi-
cal connection processes.
OM-285986 Page 15