Miller XR Python 25 Ft. Kullanıcı El Kitabı - Sayfa 10
Kaynak Sistemi Miller XR Python 25 Ft. için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller XR Python 25 Ft. 24 sayfaları. 200 ampere push-pull welding gun
Ayrıca Miller XR Python 25 Ft. için: Kullanıcı El Kitabı (31 sayfalar)
Sayfayı Yazdır
4-1. Controls and Settings
1
Tools Needed:
OM-1500-17 Page 6
SECTION 4 − OPERATION
2
1
Potentiometer
The potentiometer is located in the
lower end of the handle, providing
up to 800 ipm (20.3 mpm) with 3 3/4
turns.
2
Trigger
3
Trigger Sensitivity
Adjustment Screw
The amount of trigger level travel
can be shortened for quicker re-
sponse action.
A more sensitive trigger lever is
produced by reducing the gap be-
tween the trigger lever and the mi-
cro switch lever. Turning the trig-
ger sensitivity adjustment screw
clockwise closes the gap between
the trigger lever and the micro
switch lever. This will enable the
operator to increase the sensitivity
of the trigger level.
Sensitivity adjustment - With the
wire feeder turned on (with or with-
out welding wire loaded), turn the
screw clockwise until the micro−
3
switch is activated. Once acti-
vated, the gun and wire feeder mo-
tors will begin feeding wire. Turn
the screw counter clockwise until
the system is deactivated and ad-
justed to the operators' liking.
Close top cover.
803 870-A