Miller XR-15W Kullanıcı El Kitabı - Sayfa 15
Kaynak Sistemi Miller XR-15W için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller XR-15W 36 sayfaları. With quick disconnect ce, 200/400 ampere air/water push-pull welding gun
Sayfayı Yazdır
5-5. Threading Welding Wire Through Millermatic 350/350P
1
Open pressure assembly.
Push wire thru guides into gun;
continue to hold wire.
See Section 5-10 for threading weld-
ing wire through XR guns.
2
3
4
5
6
IMPORTANT!
For Aluminum Push-Pull welding.
Thread hub tension nut loosely
Close and tighten pressure
assembly, and let go of wire.
.
Set pressure indicator
scale to 1/2 lb.
7
8
218243-A
3/4 in.
Pull and hold wire; cut off end.
Tighten to
1/2 lb.
1
2
3
4
Ref. 803 544-A / 218 243-A / 218 244-A / S-0627-A
1
Wire Spool
2
Welding Wire
3
Inlet Wire Guide
4
Drive Roll
5
Intermediate Wire Guide
6
Outlet Wire Guide
7
Pressure Adjustment Knob
8
Gun Conduit Cable
Lay gun cable out straight.
Tools Needed:
.
Hold wire tightly to keep it
from unraveling.
6 in.
(150 mm)
IMPORTANT!
For Aluminum
Push-Pull welding.
Pressure
1
2 3
4
Indicator
Scale
218244-A
OM-236297 Page 11