Miller Digital Pro-Hobby Manuel - Sayfa 20

Motosiklet Aksesuarları Miller Digital Pro-Hobby için çevrimiçi göz atın veya pdf Manuel indirin. Miller Digital Pro-Hobby 32 sayfaları. Auto-darkening helmets

Sayfayı Yazdır

5-5. Replacing The Lens Covers On Digital Elite Standard Helmets

Be sure flat side

of gasket faces

helmet shell.

Never use the auto-

darkening lens with-

out the inside and out-

side lens covers prop-

erly installed. Welding

spatter will damage

the

auto-darkening

lens and

warranty.

Front Lens Gasket

Outside Lens Cover

Lens Assembly Gasket

Lens Assembly

Inside Lens Cover

Lens Frame

OM-256 476 Page 18

Be sure wide edge

of gasket faces

helmet shell.

Remove the lens assembly

to remove either lens cover.

To remove the lens assem-

bly, push down on the helmet

bottom retaining arms and

push the retaining clips to-

ward the outside of the hel-

void

the

met. Lift up on the assembly

and pull free of the helmet.

Outside Lens Cover

Remove the outside lens

cover by pushing cover into

the helmet. Remove the rub-

ber lens gasket and install on

the new lens cover. Reinstall

the lens assembly.

Be sure the flat side of

lens cover gasket faces

the helmet shell.

Inside Lens Cover

To replace the inside lens

cover, remove the lens as-

sembly from the lens frame

by pushing up on the top two

retaining tabs while gently

pushing the lens free.

Remove the lens cover by

sliding it out of either side.

Replace with the new cover

lens and reinstall the assem-

bly in the helmet.

Ref. 805 012