Miller WP-18 Series Kullanıcı El Kitabı - Sayfa 12
El feneri Miller WP-18 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller WP-18 Series 28 sayfaları.
Ayrıca Miller WP-18 Series için: Kullanıcı El Kitabı (20 sayfalar)
Sayfayı Yazdır
4-1. Required Torch Parts And Torch Assembly
Assembling Torch Parts
4
3
2
1
13
4-2. International Style Connector Assembly
1
2
Tools Needed:
OM-225 429 Page 8
SECTION 4 − INSTALLATION
5
6
9
10
7
8
12
11
3
1 in
(26 mm)
5
4
3
Turn Off welding power source, and
disconnect input power before in-
stalling torch.
1
Cup
2
Collet Body
3
Collet
4
Backcap (Includes O-Ring)
5
Torch Body
6
Handel
7
Water Hose
8
Gas Hose
9
Power Cable
10 Power Cable Adapter
11 International Style Adapter
12 Water Hose For International
Style Adapter
Assembling Torch Body
Keep connections tight. Replace
cup, heat shield, and backcap as
needed.
13 Tungsten
Tungsten Electrode (See Section 6)
Installing Tungsten
To adjust tungsten position, loosen
backcap.
WC0217-B
1
Weld Output Cable
2
Insulating Boot
3
Sleeve
Slide insulating boot onto cable;
strip cable and install sleeve.
4
Connector Body
5
Setscrew
Insert cable with sleeve fully into
connector body, tighten setscrew,
and slide insulating boot over con-
nector.
ST-156 496