Aquarii Zino Kurulum Kılavuzu - Sayfa 7

Taşkın Işık Aquarii Zino için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Aquarii Zino 11 sayfaları. Slope recessed

WIRING CONNECTIONS

The information below also details the procedure required to secure the Constant Controls Connection for the Zino as shown in

the Wiring Diagram below:

Follow the steps below to secure the sites Power Connections to the mounted fixture.

1. Remove the Slope Recessed Junction Box Cover to expose the Wagos inside.

2. Fully insert the ends of the Power Cable in the Wagos connected to the Ground Strap and Power Supply Wire

Connections:

• Site Ground Wire > Ground Strap in Junction Box

• Site Neutral Wire > Blue Lead of Power Supply Wire Connection

• Site Line Voltage Wire > Brown Lead of Power Supply Wire Connection.

3. Reinstall the Junction Box Cover.

4. If additional Communication Wiring is required proceed to the corresponding section starting on Page 6 of this manual,

if not, then test the fixture to ensure proper function.