Aquasana AQ-SFRO Kullanıcı El Kitabı - Sayfa 10

Su Filtrasyon Sistemleri Aquasana AQ-SFRO için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Aquasana AQ-SFRO 13 sayfaları. Under sink water filter smartflow reverse osmosis

Sayfayı Yazdır

PERFORMANCE & CERTIFICATIONS

Model

Replacements

AQ-SFRO-S1S3

AQ-SFRO

AQ-SFRO-S2

AQ-SFRO-REMIN

Operating Temp. Range

Efficiency Rating

40-100° F

27.4%

4-37° C

Manufactured by: Aquasana, Inc.

4343 Hamilton Road · Groveport, OH 43125

System tested and certified by WQA to NSF/ANSI Standards 42, 53, 58, 401, and CSA B483.1 for

the reduction of the claims specified on the Performance Data Sheet and at

www.WQA.org. This system conforms to NSF/ANSI 53 for VOC reduction. See Performance

Data Sheet for individual contaminants and reduction performance. All claims are verified and

subastantiated by test data.

For systems that do not include a dedicated faucet:

In order to maintain the NSF/ANSI 58 certification of this product, the drain line installation must comply with the

standard requirements of a vertical air gap of two pipe diameters or 25 mm (1 in), whichever is larger, or an air gap

faucet that is tested and certified against NSF/ANSI 58 must be included.

For the full list of contaminants filtered, scan to view the

AQ-SFRO Performance Data Sheet on Aquasana.com.

Recovery Rating

42.8%

Daily Production

25.7 gpd

866-662-6885

Issue

Resolution

Water Leak/

Step 1:

Turn off the cold water valve underneath the sink

Drip

and depressurize the system by opening the faucet and

releasing all the water.

Step 2:

Ensure color-coded tubing is installed into the correct

placement on the system.

Step 3:

If cutting the tubing due to excess length, cut the

tubing straight across, not at an angle.

Correct

Step 4:

Check and make sure

the tubing is fully inserted into

the system manifold until tubing

can no longer be pushed. A

loose connection can cause a

leak at the inlet/outlet.

Step 5:

Once all tubing is installed, and the system is re-

connected, turn the water valve back on and check for leaks.

Step 6:

Make sure that the cartridges are in the locked

position. They should be rotated fully clockwise until the

handles are horizontal (see illustration on page 14).

NOTE: If the unit is still leaking after checking the

cartridges and tube connections, shut off the cold water

supply valve to the RO unit and contact Customer Support

at 866-662-6885.

Slow Flow

Step 1: Ensure water is flowing from the faucet. If water is

flowing, close faucet and come back in one hour to re-check

pressure. This will allow enough time for the tank to be filled.

Step 2: If it has been over six months since changing the

filter, advise replacement of filters.

TROUBLESHOOTING GUIDE

Incorrect

0.625"

Depth to insert tubing

(actual size)