HP 1420-16G Başlangıç Kılavuzu - Sayfa 11

Anahtar HP 1420-16G için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. HP 1420-16G 23 sayfaları.

Under-table mounting

CAUTION:

A network-attached switch with cables mounted upside down can be heavy. Verify that the table is

•

sufficiently strong and of a material that can support the screws that hold the weight of the switch and the

attached cables. Make sure the cables are protected and out of the way.

•

Regularly inspect the installation of the switch to ensure that the switch remains securely anchored and

unobstructed.

Only the HP 1420- 1 6G switch supports under-table mounting. The wall mounting screws (provided) can

be used when you mount the switch under a table.

Figure 10 Under-table mounting

Mounting slots

Third securing screw

To mount the switch under a table:

Follow the instructions on wall mounting to determine the location of screw holes to be used for

under-table mounting.

Align the two mounting holes in the switch chassis bottom with the two screws on the bottom of the

table and hang the switch.

Use a third screw to prevent switch movement.

Use crossover cable or straight through cable to connect a PC or other network devices to the Ethernet

port of the switch.

Wood table