HP 1420-16G 시작하기 매뉴얼 - 페이지 11
{카테고리_이름} HP 1420-16G에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1420-16G 23 페이지.
페이지 인쇄
Under-table mounting
CAUTION:
A network-attached switch with cables mounted upside down can be heavy. Verify that the table is
•
sufficiently strong and of a material that can support the screws that hold the weight of the switch and the
attached cables. Make sure the cables are protected and out of the way.
•
Regularly inspect the installation of the switch to ensure that the switch remains securely anchored and
unobstructed.
Only the HP 1420- 1 6G switch supports under-table mounting. The wall mounting screws (provided) can
be used when you mount the switch under a table.
Figure 10 Under-table mounting
Mounting slots
Third securing screw
To mount the switch under a table:
1.
Follow the instructions on wall mounting to determine the location of screw holes to be used for
under-table mounting.
2.
Align the two mounting holes in the switch chassis bottom with the two screws on the bottom of the
table and hang the switch.
3.
Use a third screw to prevent switch movement.
Connecting cables
Connecting network cable
Use crossover cable or straight through cable to connect a PC or other network devices to the Ethernet
port of the switch.
Wood table
8