HP ProCurve 1600M Kurulum Kılavuzu - Sayfa 15

Anahtar HP ProCurve 1600M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP ProCurve 1600M 28 sayfaları. Redundant power supply
Ayrıca HP ProCurve 1600M için: Şartname Sayfası (12 sayfalar), Önce Beni Oku (8 sayfalar), İnceleme El Kitabı (27 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Kurulum Kılavuzu (36 sayfalar), Kurulum Kılavuzu (28 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kılavuz Eki (28 sayfalar), Önce Beni Oku (16 sayfalar), Kurulum ve Sökme (2 sayfalar), Kurulum Kılavuzu (12 sayfalar), Planlama ve Uygulama Kılavuzu (40 sayfalar), Ürün Kullanım Ömrü Sonu Sökme Talimatları (2 sayfalar), Kurulum Kılavuzu (46 sayfalar), Teşhis Kılavuzu (2 sayfalar), Sökme Talimatları (2 sayfalar)

Check the port LEDs for the newly-installed module to ensure that the

port(s) connected in the preceding step are operating correctly. Each port

on the switch modules has Link and Mode LEDs near it as shown in the

next illustration.

Example Link and Mode LEDs

Link and Mode LEDs

•

The Link LED will be lit for each port that is connected properly to

an active network device.

If the Link LED does not go on when an active network cable is

connected to the port, there may be something wrong with the cable,

the cable connectors, or the device at the other end of the cable. See

the troubleshooting information on page 13.

•

If the switch Mode is set to display activity (the

LED is lit), then the Mode LED for each port that is transmitting and/

or receiving packets will flicker when traffic is detected on the port.

•

If the Mode is set to display full duplex (the

is lit), then the Mode LED will be lit for each port that is operating in

full duplex.

•

If the Mode is set to display maximum link speed operation (the

mode indicator LED is lit), then the Mode LED will be lit for each port

that is operating at its maximum possible link speed. For gigabit-

capable ports, that speed would be 1000 Mbps (Gigabit); for 10/100

ports, that speed would be 100 Mbps.

Customize the port configuration, if necessary. (See "Customizing the Port

Configuration" on page 10.)

Installing the Module

mode indicator

mode indicator LED