HP ProCurve 1600M Kurulum Kılavuzu - Sayfa 27

Anahtar HP ProCurve 1600M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP ProCurve 1600M 36 sayfaları. Redundant power supply
Ayrıca HP ProCurve 1600M için: Şartname Sayfası (12 sayfalar), Önce Beni Oku (8 sayfalar), İnceleme El Kitabı (27 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (28 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Kılavuz Eki (28 sayfalar), Önce Beni Oku (16 sayfalar), Kurulum ve Sökme (2 sayfalar), Kurulum Kılavuzu (12 sayfalar), Planlama ve Uygulama Kılavuzu (40 sayfalar), Ürün Kullanım Ömrü Sonu Sökme Talimatları (2 sayfalar), Kurulum Kılavuzu (46 sayfalar), Teşhis Kılavuzu (2 sayfalar), Sökme Talimatları (2 sayfalar)

Connectors

The ports on the 10/100-TX GL Module are compatible with the IEEE

802.3 10Base-T and 802.3u 100Base-TX standards and accept the 10 Mbps

or 100 Mbps cables listed below.

The ports on the 100/1000-T GL Module and the 100/1000-T Trans-

ceiver, which can be installed in the Gigabit Transceiver GL Module,

are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab

1000Base-T standards, and accept the 100 Mbps or 1000 Mbps cables listed

below. For 1000 Mbps operation, Category 5E twisted-pair cable is

recommended.

The port on the 100-FX SC Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3u 100Base-FX standard. It accepts the

multimode fiber-optic cables for 100Base-FX described on the next page.

The port on the Gigabit-SX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 850 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-SX standard. It accepts the low

metal content, multimode fiber-optic cables for Gigabit-SX described on

the next page.

The port on the Gigabit-LX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-LX standard. It accepts the low

metal content, single mode or multimode fiber-optic cables for

Gigabit-LX described on the next page.

Twisted-Pair

10 Mbps Operation

100 Mbps Operation

1000 Mbps Operation Category 5E 100-ohm differential UTP or STP cable,

Category 3, 4, or 5 100-ohm differential unshielded twisted-

pair (UTP) or shielded twisted-pair (STP) cable, complying

with IEEE 802.3 10Base-T specifications, fitted with RJ-45

connectors

Category 5 100-ohm differential UTP or STP cable,

complying with IEEE 802.3u 100Base-TX specifications,

fitted with RJ-45 connectors

complying with IEEE 802.3ab 1000Base-T specifications,

fitted with RJ-45 connectors

(please see "Note on 1000Base-T Cable Requirements",

below)

Specifications