HP Xw460c - ProLiant - Blade Workstation Hata Önleme Kılavuzu - Sayfa 11

Anahtar HP Xw460c - ProLiant - Blade Workstation için çevrimiçi göz atın veya pdf Hata Önleme Kılavuzu indirin. HP Xw460c - ProLiant - Blade Workstation 12 sayfaları. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ayrıca HP Xw460c - ProLiant - Blade Workstation için: Uygulama Kılavuzu (35 sayfalar), Teknik Beyaz Kitap (12 sayfalar), Ürün Yazılımı Güncellemesi (9 sayfalar), Kurulum Kılavuzu (2 sayfalar), Sıkça Sorulan Sorular Kılavuzu (14 sayfalar), Kurulum Posteri (9 sayfalar), Kurulum Kılavuzu (33 sayfalar), Yönetim Kılavuzu (28 sayfalar), Donanım Kılavuzu (23 sayfalar), Genel Bakış (35 sayfalar), Kullanıcı Kılavuzu (33 sayfalar), Optimizasyon Kılavuzu (13 sayfalar), Sınırlı Garanti (10 sayfalar), Kurulum Talimatları Kılavuzu (10 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları (2 sayfalar)

•

Do not expose a hard drive to products, such as monitors or speakers, that have

magnetic fields.

•

Do not expose a drive to temperature extremes or liquids.

Preventing Electrostatic Damage

Many electronic components are sensitive to electrostatic discharge (ESD). Circuitry

design and structure determine the degree of sensitivity. Networks built into many

integrated circuits provide some protection, but in many cases the discharge contains

enough power to alter device parameters or melt silicon junctions.

A sudden discharge of static electricity from your finger or other conductor can

destroy static-sensitive devices or micro-circuitry. Often the spark is neither felt nor

heard, but damage occurs. An electronic device exposed to electrostatic discharge

may not be affected at all and can work perfectly throughout a normal cycle.

However, the device may function normally for a while, then degrade in the internal

layers, reducing the life expectancy of the device.

Handle cables with extreme care to avoid damage. Apply only the tension required to

unseat or seat the cables during removal and insertion. Handle cables by the

connector whenever possible. In all cases, avoid twisting or tearing cables. Make sure

that cables are routed in such a way that they cannot be caught or snagged by parts

being removed or replaced.

Use HP StorageWorks Library and Tape Tools (L&TT) to update tape drive

firmware, as well as manage and diagnose problems with the tape drive. For more

information, refer to

http://h18006.www1.hp.com/products/storageworks/ltt/index.html

Error Prevention Guide