HP Xw460c - ProLiant - Blade Workstation Kurulum Posteri - Sayfa 6

Anahtar HP Xw460c - ProLiant - Blade Workstation için çevrimiçi göz atın veya pdf Kurulum Posteri indirin. HP Xw460c - ProLiant - Blade Workstation 9 sayfaları. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ayrıca HP Xw460c - ProLiant - Blade Workstation için: Uygulama Kılavuzu (35 sayfalar), Hata Önleme Kılavuzu (12 sayfalar), Teknik Beyaz Kitap (12 sayfalar), Ürün Yazılımı Güncellemesi (9 sayfalar), Kurulum Kılavuzu (2 sayfalar), Sıkça Sorulan Sorular Kılavuzu (14 sayfalar), Kurulum Kılavuzu (33 sayfalar), Yönetim Kılavuzu (28 sayfalar), Donanım Kılavuzu (23 sayfalar), Genel Bakış (35 sayfalar), Kullanıcı Kılavuzu (33 sayfalar), Optimizasyon Kılavuzu (13 sayfalar), Sınırlı Garanti (10 sayfalar), Kurulum Talimatları Kılavuzu (10 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları (2 sayfalar)

Interconnect module configuration

Each interconnect module ships with a default configuration. For customized

configuration or advanced port mapping, see the installation instructions that ship

with each interconnect module.

To configure HP Virtual Connect modules, see the HP Virtual Connect for c-Class

BladeSystem User Guide on the HP website

(http://www.hp.com/go/bladesystem/documentation).

Firmware Management

To determine recommended updates and download the latest firmware, see the HP

BladeSystem c-Class Firmware and Upgrades Compatibility Matrix on the HP

website (http://www.hp.com/go/bladesystemupdates).

If you are operating the enclosure in a Microsoft® Windows® or Linux OS

environment, use the following tools to verify and update the firmware:

•

HP Smart Update Manager

The HP Smart Update Manager utility is available from the ProLiant Firmware

Maintenance CD. This CD and others can be downloaded free-of-charge

from the HP website (http://www.hp.com/support).

Online ROM Flash Component Utility

•

The Online ROM Flash Component Utility enables system administrators to

efficiently upgrade system or controller ROM images across a wide range of

servers and array controllers. To download the tool and for more

information, see the HP website (http://www.hp.com/support).

If you are operating the enclosure in a VMWare ESX OS environment, use an

offline utility such as ROMPaq to update and verify the firmware. The ROMPaq

utility checks the system and provides a choice (if more than one exists) of

available firmware revisions.

For more information about the ROMPaq utility, see the HP website

(http://www.hp.com/support).

If the blade has an OS that is pre-installed, proceed to section 7, "Management

software (on page 7)".

A. Choose a supported operating system

For the latest operating system support information, see the HP website

(http://www.hp.com/go/supportos).

B. Install an operating system

To install an operating system, use one of the following methods: