Aquatel S207E Kullanım Kılavuzu - Sayfa 4

Ölçüm Cihazları Aquatel S207E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aquatel S207E 8 sayfaları. Wireless level indicator

Install Tank Unit

Choose location for Tank Unit on the top of the tank or cistern.

Ideal. Unit in centre

of tank

Note - For tanks less than 1500 mm (5') deep mount unit in centre of tank.

- Mount unit at least 100 mm (4") from the high water level.

2. Drill a 50mm (2") hole in

tank. For thick concrete tanks

make a 75mm (3") hole.

Measure the depth of

tank to the base (or to the

water outlet). Write this

measurement down.

Insert Tank Unit in hole and

rotate so tank antenna is on

the lower side (to prevent

water entering unit). Ensure

that the transducer cone

underneath is pointing

directly at the surface of the

water.

For plastic tanks use the supplied screws to attach the Tank Unit to the tank.

For metal tanks first drill 3mm or ¼" holes, and then fasten using the screws.

For concrete tanks drill 6mm or ¼" holes, insert the supplied plastic plugs and then

fasten using the screws.

Incorrect. Mount unit

away from ribbed

walls to prevent signal

reflection off walls

Correct. For buried tanks

mount unit in centre of lid,

or on bracket mounted in

riser

Antenna should be

mounted on the

opposite side

Transducer is not

pointing at the surface

of the water

Water will not enter

antenna hole

Transducer is parallel

to water