Panasonic P1SDU - SVGA LCD Projector Kullanım Talimatları Kılavuzu - Sayfa 16
Projektör Panasonic P1SDU - SVGA LCD Projector için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic P1SDU - SVGA LCD Projector 42 sayfaları. Lcd projector commercial use
Sayfayı Yazdır
Correcting the image position
automatically (AUTO SETUP)
This projector can adjust the position of the image and the settings for "DOT
CLOCK" and "CLOCK PHASE" when PC signals are being input.
Press the AUTO SETUP button while PC signals
POWER
INPUT
MENU
are being projected.
ENTER
Screen
AUTO
SETUP
STD
SHUTTER
Projected
RETURN
image
VOLUME
ENTER
B Automatic positioning
ROTATE
will be carried out.
NOTE:
B If the dot clock frequency is 100 MHz or higher, "DOT CLOCK", and
"CLOCK PHASE" will not be adjusted automatically. Refer to page 48 for
details.
B If the edges of the projected image are indistinct, or if a dark picture is
being projected, the automatic setup processing may stop automatically
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
30-E
NGLISH
[
Turning off the picture and sound
momentarily (SHUTTER)
The "SHUTTER" function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in "SHUTTER" mode than it does
in normal projection mode.
Press the SHUTTER button.
B The picture and sound will be turned off.
POWER
INPUT
MENU
B Press any button on either the projector or
ENTER
remote control unit to return to normal operating
AUTO
mode.
SETUP
STD
SHUTTER
RETURN
VOLUME
ENTER
ROTATE
Adjusting the volume (VOLUME)
Press the VOLUME +/- button.
POWER
INPUT
MENU
B Press the + button to raise the volume.
B Press the - button to lower the volume.
ENTER
AUTO
SETUP
STD
SHUTTER
RETURN
VOLUME
ENTER
ROTATE
E
-31
NGLISH