Diamond Vantage TS400 Kullanıcı El Kitabı - Sayfa 15
Testere Diamond Vantage TS400 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Diamond Vantage TS400 20 sayfaları.
Sayfayı YazdırThe recommended cutting depth is 1/4" below the cutting table
surface. To adjust the cutting depth, loosen the cutting head
adjustment handle and set it to the lowest position, so that the blade is
1/4" below the top of the table surface.
WARNING!
Place the blade to cut completely through the material. Failing to set up as instructed may result in the saw to grab
and shoot out the tile, causing severe injuries.
Diamond Vantage
warranties this product to be free from defects in material or workmanship for a period of either 6-month or 1-year
®
following the date of purchase. As long as the product has been used under normal working conditions, Diamond Vantage
replacement parts free of charge if motor, water pump or power switch fails within the first 6 months or any mechanical part, which
does not require electrical current to operate, fails within the first year. This warranty does not cover costs for labor or transportation in
connection with the replacement or repair of defective parts. Likewise, it does not apply to any unit which has been subjected to misuse,
neglect or accident, nor to any machine which has been repaired or altered by any person other than Diamond Vantage
personnel.
SERIAL NUMBER
ITEM CODE
EQP-GF-0001010102
EQP-GF-000103053
EQP-GF-33G108102B-AG
EQP-GF-381086009
EQP-GF-382019002
EQP-GF-452202003
EQP-GF-465903203-AG
EQP-GF-471207003
EQP-GF-480190203
EQP-GF-BEVFVX200265
XII. TS400: CUTTING DEPTH
XII. WARRANTY
ITEM NAME
Y Connection 08f
Water Pump
Cutting Head Assembly F108
8.5 x 14 x 0.2t Washer
Countersunk Socket Hex Bolt 1/4 X 1 1/2
Power Switch
Roller Assembly
Carbon Brush 7 X 17
ABS Water Tray
R0151 Brush Motor
• 15 • diamondvantage.com
BLADE DIAMETER
MAX. CUTTING DEPTH
10 inch
2-1/4 inch
will provide
®
authorized
®