DiamondCore Tools CINK Kullanıcı Kılavuzu - Sayfa 6

Su Sistemi DiamondCore Tools CINK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DiamondCore Tools CINK 14 sayfaları. Self-contained system for cleanup of clay, clay water, pottery tools and accessories
Ayrıca DiamondCore Tools CINK için: Kullanıcı Kılavuzu (14 sayfalar)

Sayfayı Yazdır

OPERATION

OPERATION
Key Operating Steps
1
1
Check water levels and that faucet valve is closed (system won't function
properly if 6.5-gal. bucket is below 1/3 full). With faucet valve CLOSED
(handle upward), aim spray nozzle into sink basin.
3
4
2
Plug GFCI power cord into
OPEN the faucet valve
(handle down) to begin
3-prong electric power outlet
When finished, CLOSE the faucet
(observe safety cautions).
valve (handle up).
the flow of water.
WARNING!
NEVER plug the sink basin drain and fill the basin with water to wash parts. This may cause the buckets
to collapse if the pump keeps pumping. The CINK system is designed to function with continuous recirculation of
water.
Note: Under heavy continuous use, water may become cloudy. If the system is allowed sedimentation time, finer
(
)
particles will settle. You should periodically refresh the water in the system
at least once per week
after adequate
sedimentation time is allowed. See Maintenance (Page 7) for instructions.
Note: Unplug The CINK if it will be left unattended for extended periods of time.
6
diamondcoretools.com | [email protected]