DiamondCore Tools CINK Kullanıcı Kılavuzu - Sayfa 7

Su Sistemi DiamondCore Tools CINK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DiamondCore Tools CINK 14 sayfaları. Self-contained system for cleanup of clay, clay water, pottery tools and accessories
Ayrıca DiamondCore Tools CINK için: Kullanıcı Kılavuzu (14 sayfalar)

Sayfayı Yazdır

MAINTENANCE

To maintain The CINK, you will need to empty the 5-gallon clay collection bucket, clean the filter bag and replace the
string filter cartridge periodically. You may also need to winterize or prepare The CINK for periods of unuse. Remem-
ber, as you perform these maintenance steps, small amounts of water may leak out from the system.
Emptying the 5-Gallon Clay Collection Bucket
The 5-gallon bucket is intended to capture most of the clay and slip that will be put into The CINK. You will need to
empty this bucket more frequently than cleaning or replacing the other two filters.
To empty the 5-gallon bucket when it has collected a significant amount of clay:
1
Unplug the GFCI power cord
from the electrical outlet.
4
Twist counter-clockwise to remove
bucket and lid (keep track of clear
plastic gasket). Pour off water
and remove waste clay.
7
Turn the upper drain union to the
right to tighten. Be sure
clear plastic gasket is in place.
2
Disconnect the 5-gal.
quick disconnects.
5
Refill the 5-gal. bucket with
fresh water to the fill line.
8
Reconnect the quick disconnect linking the
5-gal. bucket to the center of the 6.5-gal. bucket.
MAINTENANCE
3
Disconnect upper drain union
by turning to the left.
6
Reattach the lid. Make sure it is
seated properly and tight. You may
need to push down on the bucket
lid so the drainpipe will fit.
| 619-905-9400
7