Alpha Communications TekTone CM900 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 7

Kontrol Sistemleri Alpha Communications TekTone CM900 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Alpha Communications TekTone CM900 8 sayfaları. Emergency call signaling system

Sayfayı Yazdır

System Operating Instructions

System operators must read the following operating

instructions concerning system equipment and terms used in

conjunction with the equipment.

CM800, CM900 Annunciators

Answer Emergency Calls: Emergency calls are indicated by

simultaneous operation of the following signals:

• Steady illumination of the associated station selector

lamp, which is marked to indicate call origin.

• Rapidly pulsating audible tone. The audible call signal

may be canceled by pressing the tone-off button. The

tone-off light will illuminate to indicate that tone is

silenced. The tone-off button may be pressed at any time

to verify operation of the tone-off lamp.

Call signals may only be canceled at the point of origin, and

all calls must be answered in person.

Test Station Annunciator Lamp (if so equipped): One lamp test

button is provided on each panel of annunciator lamps.

Press the lamp test button—all annunciator lamps on that

panel should be illuminated.

Improper Operation: If the CM800 or CM900 Annunciator fails

to operate as described, contact qualified maintenance

personnel. If a malfunction occurs during a call-in, causing

a lack of indication of call origin on the master station, first

determine the origin of the call by observing which corridor

light is illuminated, and then inform qualified personnel.

SF117-, SF118-series Emergency Call Stations

Place an Emergency Call: Pull the call cord and wait for an

Attendant. (Note: The SF118 series station has a red call-

placed light that illuminates when the cord is pulled.)

Reset the Station: Push the slide switch up.

Improper Operation: If the station does not operate as de-

scribed, contact qualified personnel. There are no user

serviceable parts on SF117 series and SF118 series Emer-

gency Call Stations.

SF154 Emergency Call Station

Place an Emergency Call: Press the switch in so that the red

area of the switch is visible, and wait for an Attendant.

Reset the Station: Press the switch out so that the red area of

the switch is not visible.

Improper Operation: If the station does not operate as de-

scribed, contact qualified personnel. There are no user

serviceable parts on the SF154 Emergency Call Station.

IR019, IR019B Remote Annunciator Tone Speakers

Emergency Calls: Emergency calls are indicated by a rapidly

pulsating audible tone. The audible tone signal can be

silenced by pressing the tone-off switch. (The IR019 is not

equipped with a tone-off light.) The IR019 and IR019B tone

mimics the annunciator tone—either steady or pulsing.

Improper Operation: If the speaker does not operate as de-

scribed, contact qualified personnel. There are no user

serviceable parts on the IR019 and IR019B Remote Annun-

ciator Tone Speakers.

Emergency Calls: Emergency calls are indicated by steady

illumination of the corridor light associated with the calling

station.

Improper Operation: If the corridor light does not operate as

described, contact qualified service personnel. There are no

user serviceable parts on the LI381 Corridor Light, other than

bulbs.

LI382, LI382LED Corridor Lights

Emergency Calls: Emergency calls are indicated by steady

illumination of the corridor light associated with the calling

station. The second light can be used for other call types

initiated from the same zone.

Improper Operation: If the corridor light does not operate as

described, contact qualified service personnel. There are no

user serviceable parts on the LI382 Corridor Light, other than

bulbs. There are no user serviceable parts on the LI382LED

Corridor Light.

LI118B, LI123B Corridor Lights

Emergency Calls: Emergency calls are indicated by steady

illumination of the corridor light and a steady buzzer.

Improper Operation: If the corridor light does not operate as

described, contact qualified service personnel. There are no

user serviceable parts on the LI118 and LI123B Corridor

Lights, other than bulbs.

BE005, BE007 Corridor Bells

Emergency Calls: Emergency calls are indicated by a steady

ringing of the corridor bells.

Improper Operation: If the corridor bell does not operate as

described, contact qualified service personnel. There are no

user serviceable parts on the BE005 and BE007 Corridor

Bells.

IL514 CM800/CM900 Emergency Call System Manual • Page 7