Dickson TP325 Kullanım Talimatları Kılavuzu - Sayfa 5

Veri Kaydediciler Dickson TP325 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Dickson TP325 9 sayfaları.

Display/Push to Start

The display will remain blank when Press Button to Start has been selected in Setup but logging has not yet

begun.

If the display is flashing the unit is not logging.

Min/Max Display

• There are two display options: Current Readings only or Current/Min/Max scroll, which can be selected

under Setup/Display.

• To reset Min/Max readings on the display, a paper clip or toothpick should be used to depress the

Min/Max Clear button located on the back of the unit. This will not clear logged data.

Press Button to Start

• This feature needs to be selected when the logger is setup (Setup/Samples). Hold down the start

button on the front of the unit for 1 second. The display will turn on. The logger is now logging.

Pressing the button again will not stop logging.

Battery

• The battery is a user replaceable lithium DL123 or CR123 battery. At a 2 minute sample rate, the

battery should last 1 year. More frequent sampling and/or operating unit at extreme ranges will

shorten battery life.

Rev. 05/09