Alpha ESS SMILE-BAT-10.1P Hızlı Kurulum Kılavuzu - Sayfa 6

Kamera Aksesuarları Alpha ESS SMILE-BAT-10.1P için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Alpha ESS SMILE-BAT-10.1P 7 sayfaları.

Configuration with GoodWe Inverter

1. If there is only one BAT, DIP switch of BAT should be set as below:

2. If there are two or more than two BAT, DIP switch of BAT should

be set as below:

If there are two or more than two BAT, after connecting the

power cables, please refer to the following steps:

Only connect the communication cable between batteries at the

first, and turn on the batteries.

Wait until batteries get to work mode (The green light flashes

every 10 seconds) and then connect the communication cable

between BAT and INV.

Configuration with Inverter

GoodWe SBP /AlphaESS SMILE 5 series

The communication cable between INV and BAT is regular net cable.

1. If there is only one BAT, DIP switch of BAT should be set as below:

2. If there are two or more than two BAT, DIP switch of BAT should

be set as below: