EPH Controls BST3 Kurulum ve Kullanım Kılavuzu - Sayfa 9

Zamanlayıcı EPH Controls BST3 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. EPH Controls BST3 16 sayfaları. Boost timer pro

Safety

Switch the 230V mains supply off by removing the relevant

fuse or switching off the relevant MCB prior to beginning the

installation.

A minimum conductor size of 2.5mm

must be used to supply

the Boost Timer.

Ensure the correct sized cable is used to connect the Boost

Timer to the relevant appliance to be switched.

For 3 kW loads, a minimum cable size of 1.5mm

should be used.

As per diagram on page 6 and 7.

Connect the mains supply cables to the correct terminals;

L in, N in and Earth.

Connect the load cables to the correct terminals, L out, N out

and Earth.

Boost Timer Pro