Olympus BX41-P Talimatlar Kılavuzu - Sayfa 12

Mikroskop Olympus BX41-P için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus BX41-P 36 sayfaları. Polarizing microscope
Ayrıca Olympus BX41-P için: Talimatlar Kılavuzu (36 sayfalar)

Sayfayı Yazdır

Fig. 9

Fig. 10

Mounting Rotatable Analyzer (U-AN360P-2)

1. Place a desired ND filter (30 mm diam.) in the empty hole @ as required.

2. Insert the rotatable analyzer (U-AN360P-2) ² as far as the click-stop

position. Then screw in the stopper knob ³. (Fig. 10)

When using the fixed analyzer U-ANT instead of the rotatable analyzer

U-AN360P-2, place the fixed analyzer in the test plate adapter U-TAD.

Position the fixed analyzer so that the positioning pin on the fixed

analyzer fits into the groove. The fixed analyzer will be held in place by

a magnet.

Mounting Test Plate Compensator

1. Loosen the test plate adapter (U-TAD) clamping knob @.

2. Insert the sensitive tint plate (U-TP530), quarter wave plate (U-TP137),

or any of the other compensators (6 types) into the test plate adapter,

and securely tighten the clamping knob.

(Fig. 9)

(Fig. 10)