Olympus BXFM-ILHS Talimatlar Kılavuzu - Sayfa 6

Mikroskop Olympus BXFM-ILHS için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus BXFM-ILHS 36 sayfaları. Focusing unit

Getting Ready

1. A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.

2. Do not use the microscope system where it is subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating conditions, refer to chapter 7, "SPECIFICATIONS".)

3. One intermediate attachment can be used by installing U-CA magnification changer or U-EPA2 eyepoint adjuster above

the reflected light illuminator.

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the microscope components other than the glass components. To clean

them, use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

3. Never attempt to disassemble any part of the microscope system.

4. When not using the microscope, set the main switch to "

sufficiently, cover it with a dust cover.

5. When disposing of this product, check the regulations and rules of your local government and be sure to observe them.

Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The warning, caution and other notes in this manual use the following symbols.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

" (OFF). After making sure the lamp housing has cooled down