Olympus CX41 Talimatlar Kılavuzu - Sayfa 6

Mikroskop Olympus CX41 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus CX41 32 sayfaları. System microscope
Ayrıca Olympus CX41 için: Genel Bakış (7 sayfalar), Talimatlar (32 sayfalar)

Sayfayı Yazdır

Maintenance and Storage

1. Clean all glass components by wiping gently with gauze. To remove fingerprints or oil smudges, wipe with gauze

slightly moistened with a mixture of ether (70%) and alcohol (30%).

Since solvents such as ether and alcohol are highly flammable, they must be handled carefully. Be sure to

keep these chemicals away from open flames or potential sources of electrical sparks -- for example,

electrical equipment that is being switched on or off. Also remember to always use these chemicals only in a

well-ventilated room.

2. Do not attempt to use organic solvents to clean the non-optical components of the microscope. To clean them, use a

lint-free, soft cloth lightly moistened with a diluted neutral detergent.

3. Do not disassemble any part of the microscope as malfunction or damage may occur.

4. When not using the microscope, ensure that the frame is cooled down and store it in a locker or cover it with a dust

cover.

5. When disposing of the microscope, check the regulations and rules of your local goverment and be sure to observe

them.

Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In

addition, the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

This device complies with the requirements of directive 98/79/EC concerning in vitro diagnostic medical devices.

CE marking means the conformity to the directive.

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,

FCC WARNING : Changes or modifications not expressly approved by the party responsible for compliance

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

could void the user's authority to operate the equipment.