Olympus PSD-10 Talimatlar Kılavuzu - Sayfa 25

Tıbbi Ekipman Olympus PSD-10 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus PSD-10 28 sayfaları. Electrosurgical unit

CARE

AND

Wipe cords clean.

Wipe panel clean.

8 - 2 S t o r a g e

Band

Put on the vinyl cover.

Disconnect the A-cord, S-P cord and footswitch from the PSD-10.

Lightly wipe all surfaces using a soft cloth or gauze sponge. If dirt remains,

moisten the gauze with disinfectant ethanol and wipe again.

For disinfection, wipe with a gauze sponge moistened with disinfectant ethanol

or 2% glutaraldehyde solution.

again with disinfectant ethanol to remove all residue.

Avoid touching the electrical contacts and connectors: poor electrical contact

will result.

To prevent scratches, do not use harsh or abrasive wiping material.

Surfaces must be thoroughly dry before use.

Wind the power cord around the hanger on the rear of the PSD-10.

Place the PSD-10 on a stable surface in the horizontal position.

Put on the vinyl dust cover.

Storage area must be maintained at normal temperature and humidity,

and away from water splashes.

Do not subject to heavy blows or impacts.

Non-Controlled Document

If a glutaraldehyde solution is used, wipe