Olympus SZ2-ILLC Talimatlar Kılavuzu - Sayfa 13

Laboratuvar Ekipmanları Olympus SZ2-ILLC için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus SZ2-ILLC 16 sayfaları. Coaxial illuminator
Ayrıca Olympus SZ2-ILLC için: Talimatlar Kılavuzu (16 sayfalar)

Sayfayı Yazdır
b
a
c
d
Fig. 1
1
Installing the Coaxial Illuminator
If a auxiliary objective is attached, remove it.
NOTE
1
Screw the mount adapter b fully into the bottom of the SZ2 series
microscope body a by turning the mount adapter in the direction
of the arrow.
2
Loosen the clamping screw c of the SZ2-ILLC coaxial illuminator, fit
the illuminator into the mount adapter b and tighten the clamping
screw again.
Make sure that the SZ2-ILLC is installed correctly in the
NOTE
frontward orientation. Otherwise, it would be impossible to
attach the light guide.
2
Attaching the Light Guide
1
Using the Allen wrench provided with the SZ2-ILLC, loosen the
clamping screw d of the light guide mount port and insert the output
end of the light guide all the way into it.
2
Tighten the clamping screw d .
SZ2-ILLC
(Fig. 1)
(Fig. 1)
10