Olympus SZ2-ILLC 사용 설명서 - 페이지 13
{카테고리_이름} Olympus SZ2-ILLC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ2-ILLC 16 페이지. Coaxial illuminator
Olympus SZ2-ILLC에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄b
a
c
d
Fig. 1
1
Installing the Coaxial Illuminator
If a auxiliary objective is attached, remove it.
NOTE
1
Screw the mount adapter b fully into the bottom of the SZ2 series
microscope body a by turning the mount adapter in the direction
of the arrow.
2
Loosen the clamping screw c of the SZ2-ILLC coaxial illuminator, fit
the illuminator into the mount adapter b and tighten the clamping
screw again.
Make sure that the SZ2-ILLC is installed correctly in the
NOTE
frontward orientation. Otherwise, it would be impossible to
attach the light guide.
2
Attaching the Light Guide
1
Using the Allen wrench provided with the SZ2-ILLC, loosen the
clamping screw d of the light guide mount port and insert the output
end of the light guide all the way into it.
2
Tighten the clamping screw d .
SZ2-ILLC
(Fig. 1)
(Fig. 1)
10