Axminster ZQJ4125K Manuel - Sayfa 12

Elektrikli Alet Axminster ZQJ4125K için çevrimiçi göz atın veya pdf Manuel indirin. Axminster ZQJ4125K 18 sayfaları.

4: ADJUSTMENTS

Speed Changes

Unplug the drill press before changing speeds. The drill press has 12 speeds.

There is a speed chart located under the belt guard. Refer to the chart while reading these

instructions.

1. Loosen the belt tension lock knobs on both sides of the headstock by turning

counterclockwise as shown in Figure 13.

2. The motor should be free to move. Rotate the belt tension lever counterclockwise to

take tension off the V-belts as shown in Figure 14.

3. Locate the desired speed on the chart and move the V-belts to the desired V-grooves

on the motor, idler and spindle pulleys.

4. Rotate the belt tension lever until the belts are tight. Tighten both lock knobs.

5. Close the cover.

We reserve the right of the amendment addition and deletion of the

specifications, explanatory wording, etc. printed in this manual

PDF 文件使用 "pdfFactory Pro" 试用版本创建

DRILL PRESS MANUAL

Figure 11

www.fineprint.cn

Figure 12

Figure 13