AccuMed ABP802 Kullanım Kılavuzu - Sayfa 13

Kan Basıncı Monitörü AccuMed ABP802 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AccuMed ABP802 16 sayfaları. Upper arm blood pressure monitor

Sayfayı Yazdır

TROUBLESHOOTING

If you have trouble in using the unit please check the following points first.

ERROR DISPLAY

Nothing is displayed

when you push the

POWER button or

battery icon flashes.

Can't normally

increase pressure

Inflate pressure is too

high

Shaking while

measuring

Battery icon on

The systolic pressure

value or diastolic

pressure value too

high

The systolic pressure

value or diastolic

pressure value too

low

ACCOMPANYING DOCUMENTS

A. Instructions for use

1.MODEL ABP802 needs special precautions regarding EMC and needs to be installed and

put into service according to the EMC information provided in the ACCOMPANYING

DOCUMENTS;

2. Portable and mobile RF communications equipment can affect MODEL ABP802.

B. Technical description

1. Warning that the use of accessories, transducers, and cables other than those specified

with the exception of transducers and cables sold by the manufacturer of the MODEL ABP802

as replacement parts for internal components, may result in increased EMISSIONS or

decreased IMMUNITY of the MODEL ABP802.

2. Warning that the MODEL ABP802 should not be used adjacent to or stacked with other

equipment

POSSIBLE CAUSE

No battery installation

Batteries are dead

The batteries are installed

correctly

Check your arm cuff for any

air leakage

Hand or body shaking while

measuring

Batteries have low power

The arm cuff was held lower

than your heart

The arm cuff was not attached

properly

You moved your body or

spoke while measuring

The arm cuff was held higher

than your heart

You moved your body or

spoke while measuring

HOW TO CORRECT

Insert batteries

Replace with new batteries

Insert battery in the correct polarities

Replace arm cuff with new one

Re-measure or send back to dealer to

re-calibrate pressure

Keeping static and correct gesture to

measure again

Replace batteries and measure again

Keep the correct position, remain still,

and measure again