Cinetech BSF HYDRA CLEAN Kullanım ve Bakım Kılavuzu - Sayfa 6
Ultrasonik Mücevher Temizleyici Cinetech BSF HYDRA CLEAN için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Cinetech BSF HYDRA CLEAN 20 sayfaları. Motion picture film cleaner
Sayfayı YazdırMAIN OPERATING PRINCIPLES
The BSF Hydra Clean film cleaner has been designed with operator ease of use and complete
adjustability in all operating aspects to enable film to be cleaned in the most effective manner.
All operating aspects are controlled and adjusted via the intuitive and easy to read touchscreen interface.
The individual aspects of the machine that are controlled via the touchscreen are as follows:
•
Film speed (default unit of measurement is feet per minute)
•
Film tension (measured in grammes, 700g being the normal film tension value)
•
Applicator roller speed
•
Solvent transfer roller speed
•
Drying buffer speed
•
Overall buffer contact pressure
•
Buffer assembly contact on either cell or emulsion
•
Winding type selection
The film is cleaned by the following means (please see the picture below):
•
Particle transfer rollers (PTRs)
•
Wet buffer roller (1 stage)
•
Dry buffer rollers (2 stages)
•
Particle transfer rollers
A detailed description follows:
1. The first PTRs remove any loose dirt. This removes grit that would otherwise be picked up by the
wet buffer rollers.
2. The wet buffer rollers remove grime, especially fingerprints.
3. The two stages of dry buffer rollers dry the film. These rollers create an air flow as they spin, thus
drying the film and drying themselves as well.
4. The final PTR rollers remove any loose dust or particles picked up from the air.
Page 6 of 20