Cinetech BSF HYDRA CLEAN Kullanım ve Bakım Kılavuzu - Sayfa 9
Ultrasonik Mücevher Temizleyici Cinetech BSF HYDRA CLEAN için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Cinetech BSF HYDRA CLEAN 20 sayfaları. Motion picture film cleaner
Sayfayı YazdırOperation
1. Switch on the machine
2. Using the
3. Select the required film speed, tension buffers speed, temperature etc. using the main screen
controls.
4. Thread the machine with film, starting with the left hand feed plate, and follow the threading
diagram until you reach the right hand plate. Thread the film onto the right hand core and take up
any film slack within the lacing path. Ensuring both aluminium locking nuts are hand tight.
5. Close the front doors.
6. When lacing is completed and checked, press the "Start" button. The machine will move the
buffers into position and start tensioning film. The operating status will be displayed on the touch
screen ("Closing rollers...", "Tensioning...").
When the film tensioning process is complete and the solvent has reached its operating temperature and
working level, the machine will start. The speed is ramped up gradually until the target speed is reached.
Status display indicates "Running".
buttons on the main screen, choose the type of winding.
The machine will not start until the solvent reaches the required level.
A notice "WAITING FOR SOLVENT TO REACH THE LEVEL" is
displayed during this period.
Each time the machine is started from cold, it is necessary to allow
the solvent to warm up to its optimum temperature. A notice
"WAITING FOR SOLVENT TO REACH THE TEMPERATURE" is
displayed during this period.
Page 9 of 20