AccuPower IQ-328 Kullanım Talimatları Kılavuzu - Sayfa 3
Akü Şarj Cihazı AccuPower IQ-328 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AccuPower IQ-328 9 sayfaları. Intelligent fast charger
Sayfayı Yazdır
Function buttons:
Mode button
(MODE)
MODE button (mode):
After inserting the batteries, the MODE button is used to select the desired charging
mode ("CHARGE", "Discharge", "REFRESH" or "TEST"). To selecting you need
to hold the MODE button for about 3 seconds. By repeatedly pressing will shown
on the display the current mode. The settings are always applied to all occupied
slots.
DISPLAY button (display):
During charging, you can press DISPLAY button to get the following values:
•
the battery voltage (V)
•
Charging time in hh: mm (h)
•
The charged capacity (mAh or Ah)
•
The present charge and discharge current (mA)
CURRENT button (charging current):
You can Select the charge current within a period of 5 seconds after inserting the battery
by CURRENT button. As Standard charging current the charger uses
automatically 200 mA.
FUNCTIONS OF THE CHARGER:
The following functions can be selected:
•
the battery voltage (V)
•
CHARGE function: Charging batteries
•
DISCHARGE function: discharging batteries. This Function minimizes the
memory effect.
•
DISCHARGE-REFRESH function: regeneration of old batteries. This function is
especially useful for old and long-stored batteries. It tries to reach an increase in
capacity by charging and discharge.
•
TEST function: This Function is used to approximate the exact capacity in mAh or
Ah to determine the battery.
For each mode: After the battery has reached full capacity (display shows "Full ") the
charger will be switched automatically to controlled trickle charge (the batteries are
charged with controlled low Current).
3/8
Display button
(DISPLAY)
Current button
(CURRENT)