Axvue E600 Kullanım Kılavuzu - Sayfa 8
Bebek Monitörü Axvue E600 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axvue E600 12 sayfaları. Video baby monitor with 2.4" lcd screen and night vision
Sayfayı Yazdır
Favorite features (continued)
Volume adjustments allow higher volume settings for parents who want to hear every little sound
from baby, like cooing, and lower volume settings to monitor louder sounds and cries from baby.
Easily adjust the volume based on your preferences and the level of other sounds in the home.
Brightness can be adjusted, as well, to accommodate the level of light in the room. Using the
brightness control feature enables lighter or darker video, depending on room viewing conditions.
Use the UP and DOWN arrows to adjust the brightness.
While operating on battery power, the video screen will go to sleep, to conserve battery power.
Audio and sound lights continue to function normally. Video sleep mode is not available when
using AC adapter.
This button turns the video mode on from video sleep mode. It is ideal for a quick view of baby in
the middle of the night. To monitor in audio only mode, simply press the VIDEO ON/OFF again to
turn the video screen off.
FAQ
-Make sure the camera and handheld monitor unit are paired (see page 5 )
-Make sure the camera and handheld monitor unit are both turned on
-Make sure the AC adapters are plugged in
-Make sure the outlets are working
-Make sure the battery is charged before working as portable mode
-Keep the camera and monitor out of WiFi router (more than 10 feet ) off.
-Press the VIDEO ON/OFF button once to turn on video mode
-Check to make sure nothing is blocking the camera
-Test reception by moving the monitor and/or camera to different locations
-Pair the camera and monitor again
-Power the monitor completely off, remove and re-insert the battery, then turn monitor back on.
-Turn up the volume using Volume Control
-Make sure the camera and handheld monitor unit are paired.
-Position the monitor closer to the camera, but not adjacent.
-Move the monitor away from other electronic devices, WiFi router, etc.
-Adjust the brightness using Brightness Control
-Test reception by moving the monitor and/or camera to different locations
SQUEALING SOUND COMING FROM SPEAKER ON MONITOR
-Move the monitor and camera further away from each other
-Turn the volume down using Volume Control
-Power the monitor completely off, remove and re-insert the battery, then turn the monitor on again.
PAGE 7
ADJUSTABLE VOLUME AND BRIGHTNESS
POWER-SAVE MODE
VIDEO ON-OFF BUTTON
NO PICTURE OR SOUND
SOUND BUT NO PICTURE
PICTURE BUT NO SOUND
PICTURE NOT CLEAR