Axvue E600 Kullanım Kılavuzu - Sayfa 6
Bebek Monitörü Axvue E600 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axvue E600 12 sayfaları. Video baby monitor with 2.4" lcd screen and night vision
Sayfayı Yazdır
Setup & use (continued)
Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie., living room
or bedroom). Plug the monitor AC adapters into the AC adapter jacks and other ends into
standard electrical outlets.
Step 2: Press and hold POWER/MENU button for 5-seconds to power up until the AXVUE logo or
video appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF button top of the unit.
Step 4: To turn the monitor off completely, press and hold the POWER/MENU button for 5-seconds.
Before using the monitor, charge the battery for 6-8 hours.
Step 1: Charge the battery for 4 hours at least, before using the monitor in portable mode.
Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into
the camera, as they are shown on the body.
Step 3: The battery life can be up to 6-hours if charged overnight.
Battery life will be weaken if recharging constantly. Charge the battery after the indicator is shown.
Remove battery if long time of non-use, or exhausted.
The monitor and the camera are paired prior to the shipment. If the monitor
and camera are found not paired for some reason, follow steps below:
Step 1: Make sure the monitor is at the same area as the camera.
Step 2: Keep the camera powered off.
Step 3: Press Power/VIDEO
OK/Menu button
Right/Zoom In
which is show as below . Select ADD CAM icon
an availabe number and press OK/menu
wireless connecting icon is shown.
Press 5 second
to power on.
Step 4: Power on the camera within 8 seconds.
Step 5: Wait 3 seconds, the red LED will stop flashing once paired successfully, and video will appear.
PAGE 5
TO USE PLUGGED-IN
TO USE PORTABLE / BATTERY MODE
TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )
button for 5 second to power on the monitor. Then press
, highlight camera option
button, press the OK/menu
OFF
by using Left/Temperature mode
button to enter the camera options menu
, press OK/menu
button to start pairing, the red LED will flash and
1
ON
button to camera list, select
Red LED will flash
2
3
4
or