Digicom HSUPA Kullanıcı Kılavuzu - Sayfa 11

Modem Digicom HSUPA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digicom HSUPA 18 sayfaları. 3g modem usb internal

3G Modem USB Internal

2. INSTALLATION

The installation procedure divides into:

NOTE: Windows requires the driver installation as first step, unlike Linux that wants the hardware installation

before.

2.1. HARDWARE INSTALLATION

The installation on a PCI card is used as example.

Go on with the following procedure with PC off.

• Remove the product from its package and verify it is ok.

• Before operating on your PC, disconnect the power plug.

• Remove the PC cover to access the internal slots.

• Find out a free PCI slot.

This slot is used for mechanical fixing only.

• Insert 3G Modem USB Internal and fix the card using the screw of the slot.

• Connect 3G Modem USB Internal to a USB port of your PCI card.

• Insert the SIM, we suggest to disable the PIN.

Attention: it is not possible to insert the SIM when the card is powered.

• Connect the power to 3G Modem USB Internal.

• Close the PC cover.

2.2. DRIVER INSTALLATION

• In the folder (\driver\windows) you find "3G_Watcher_Generic_Build1665.msi" file. When executed this file will automatically

install the driver and the Watcher utility to establish and manage the data connection.

• If your application requires the drivers only, go on with the manual installation as follows:

• Execute the "DriverInstaller" utility (\driver\windows\DriverInstaller), the driver installation will start.

• Once the procedure is over you can go on with the hardware installation.

• At restart the operating system will detect a new hardware and the installation will be automatically performed.

• Now 3G Modem USB Internal is ready for use.

Installation

2.1