Axxess AX-LCD Kurulum Talimatları - Sayfa 3

Otomobil Aksesuarları Axxess AX-LCD için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Axxess AX-LCD 5 sayfaları. Lcd screen 2000-up
Ayrıca Axxess AX-LCD için: Kurulum Talimatları Kılavuzu (16 sayfalar), Kurulum Talimatları (4 sayfalar)

Sayfayı Yazdır

The AX-LCD allows the retention of the vehicles personalization menu that is lost after removing the factory radio.

The DIN harness with leads is only for the following vehicles:

• Connect the Black wire to ground.

• Connect the Red wire to accessory power.

For the Toyota Camry 2012-2014

The following connections are to be made to

the factory 28-pin connector behind the radio:

• Pink of the AX-LCD to pin-9

• Blue/Pink of the AX-LCD to pin-10

For the Mazda 6 2014-2015

The following connections are to be made to

the factory 24-pin connector behind the radio:

• Pink of the AX-LCD to pin-1L

• Blue/Pink of the AX-LCD to pin-1J

CONNECTIONS TO BE MADE

(For retaining and controlling the factory satellite radio while using an Axxess Interface)

• Connect the DIN cable from the LCD screen into the DIN connector on the Axxess interface.

CONNECTIONS TO BE MADE

(For retaining the personalization menu that is lost when removing the factory radio)

(this is the pin view of the factory harness)

(this is the wire view of the factory harness)

For the Fiat 500L 2014-up,

Ram 1500/2500/3500 (without 8.4" touchscreen radio),

Chassis Cab 3500/4500/5500 (without 8.4"

touchscreen radio) 2013-up,

The following connections are to be made to the factory 52-pin

connector behind the radio:

(this is the pin view of the factory harness)

• Blue/Pink of the AX-LCD to pin-12

• Pink of the AX-LCD to pin-2