Epson 1160 CFS Kurulum Talimatları Kılavuzu - Sayfa 7

Yazıcı Epson 1160 CFS için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Epson 1160 CFS 12 sayfaları.

5. Install Tubing Bracket - 6 1/2" from right end of printer opening – See photo

The 6 1/2" is not from the outside of the printer, but from the inside opening of

the housing to the center of the bracket. Use an alcohol swab to clean the plastic

before attaching the bracket. Once it goes down, it is there to stay, so don't put it

in the wrong spot.

screwdriver and twist it under the bracket.

Note: If you have a refurbished 1160 with a housing that does not look like the one

above, use the bracket with the 45 degree bend instead of the long flat bracket.

6. Prepare Cartridges for Installation

Put some newspaper or paper towels in front of your printer.

Do not remove foil pull tabs from top of cartridges.

Insert the cartridges into the cartridge holder. Make sure the black felt pads are

on the cartridges. There should be 2 on the black cartridge and 2 on the color

cartridge. When you insert the cartridges be careful that the felt pads do not

come off or change position. You will have to insert the cartridge slowly to get a

nice tight fit. Make sure the cartridges are down all the way and seated firmly on

the bottom of the cartridge holder. These felt pads will prevent the cartridge

from coming loose or from being pulled out by the tension on the tubes.

Do not lift the cartridges off the posts or out of the cartridge holder once

they are down. This will introduce a large air pocket into the print heads and

may prevent the printer from working properly.

S a v e

M o n e y

MIS Associates Inc

http://www.inksupply.com

This is important.

If you have to remove it, use a wide blade

a n d

I m p r o v e

2901 Auburn Rd

Fax: 248-289-6013

This is important.

This is very important.

Y o u r

Auburn Hills, MI 48326

P r i n t i n g

800-445-8296