Axxess RFASWC Kurulum Talimatları Kılavuzu - Sayfa 5
Otomobil Elektroniği Axxess RFASWC için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Axxess RFASWC 12 sayfaları. Wireless swc universal add-on
Ayrıca Axxess RFASWC için: Kurulum Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
5. The led will then flash up to 10 times.
6. This is the end of the auto detection stage. If the RFASWC detected
the radio successfully the led will light up solid red.
7. Make sure the steering wheel control buttons function correctly in the
vehicle and enjoy your radio.
So what if the led does not light up solid red? Check out troubleshooting
section below.
Troubleshooting the Auto Detect Mode
So you tried the auto detect feature and at the end the led did not stay on
solid red, it started flashing. That means the RFASWC did not detect the
radio. Follow these couple steps to determine what happened:
First some basic steps:
1. Verify that you have 12 volt accessory and a good ground to the
RFASWC.
2. Verify that the 3.5mm connector is connected to your radio securely
and in the correct location.
3. If using the female 3.5mm connector on an Eclipse or Kenwood radio,
verify that the radio's SWC wire is connected to the correct wire on
the RFASWC.
4