DigiDesign 96i I/O Manuel - Sayfa 13

Kayıt Ekipmanları DigiDesign 96i I/O için çevrimiçi göz atın veya pdf Manuel indirin. DigiDesign 96i I/O 20 sayfaları. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
Ayrıca DigiDesign 96i I/O için: Hızlı Kılavuz (13 sayfalar), Manuel (16 sayfalar)

Sayfayı Yazdır

chapter 3

Installing and Conﬁguring the 96i

This chapter provides basic instructions for in-

stalling a 96i I/O, and configuring its operating

levels.

See the Getting Started with HD Guide for

complete system installation and configu-

ration instructions.

If you are adding the 96i I/O to an existing

system, see the Expanded Systems Guide.

Installing the 96i

All installations require the following AC power

and DigiLink connections. Expanded systems

also require Loop Sync connections.

Before You Begin

Turn off your computer, hardware inter-

faces, monitoring system, hard drives, and

peripherals. Making connections while

power is on can damage your system.

Power

To connect AC power to the 96i:

Using the AC power cable included with the

unit, connect the 96i I/O to a standard AC

power receptacle. The 96i I/O is auto power-se-

lecting (100V to 240V) and will work automati-

cally when plugged into an AC power receptacle

in any country.

DigiLink Connections

DigiLink connections differ depending on

whether the 96i I/O is the primary audio inter-

face in the system, or if it is being added as an

expansion I/O to an existing HD system.

To connect the 96i I/O as the primary interface in

a Pro Tools|HD system:

Connect one end of the included DigiLink ca-

ble to the Primary Port on the 96i I/O.

Connect the other end of the DigiLink cable

to the DigiLink port on the HD Core card. (See

the Getting Started with HD Guide for complete

installation instructions.)

Chapter 3: Installing and Conﬁguring the 96i