Epson AcuLaser C8600 Kurulum Kılavuzu - Sayfa 26
Yazıcı Epson AcuLaser C8600 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson AcuLaser C8600 44 sayfaları. Epson aculaser c8600: specifications
Ayrıca Epson AcuLaser C8600 için: Teknik Özellikler (1 sayfalar), Hızlı Referans (23 sayfalar)
Sayfayı Yazdır
8. Plug the printer's power cord into an electrical outlet.
9. Turn on the printer.
10. To confirm that the Hard Disk Drive is installed correctly,
print a status sheet. See "Printing a status sheet" on page 29.
Installing a Memory Module
Increasing the printer's memory allows you to print complex or
graphics-intensive documents. You can increase printer memory
up to 1 GB by installing optional Dual In-line Memory Modules
(DIMMs).
This printer has two DIMM slots, but one slot has a 64 MB DIMM
already installed in it at the time of manufacture. To increase
printer memory to its maximum of 1 GB, you have to purchase
two 512 MB DIMMs and remove the original 64 MB DIMM.
You can purchase DIMMs from various vendors. Be sure they
meet the following requirements.
DRAM type
Memory size
Type
Clock frequency
CAS Latency
Height
* SPD stands for Serial Presence Detect, a chip residing on the memory module
that contains information about the size, speed, and other specifications of
the memory as well as manufacturer information that can be retrieved by
the motherboard through electronic signals.
22
Installing Options
Synchronous Dynamic RAM Dual In-line
Memory Module (SDRAM DIMM)
64, 128, 256, or 512 MB
168-pin type, 64 bit, with SPD*
100 MHz or higher (10 ns or less)
CL=2
Less than 40 mm