Epson AcuLaser C8600 설정 매뉴얼 - 페이지 26
{카테고리_이름} Epson AcuLaser C8600에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C8600 44 페이지. Epson aculaser c8600: specifications
Epson AcuLaser C8600에 대해서도 마찬가지입니다: 사양 (1 페이지), 빠른 참조 (23 페이지)
페이지 인쇄
8. Plug the printer's power cord into an electrical outlet.
9. Turn on the printer.
10. To confirm that the Hard Disk Drive is installed correctly,
print a status sheet. See "Printing a status sheet" on page 29.
Installing a Memory Module
Increasing the printer's memory allows you to print complex or
graphics-intensive documents. You can increase printer memory
up to 1 GB by installing optional Dual In-line Memory Modules
(DIMMs).
This printer has two DIMM slots, but one slot has a 64 MB DIMM
already installed in it at the time of manufacture. To increase
printer memory to its maximum of 1 GB, you have to purchase
two 512 MB DIMMs and remove the original 64 MB DIMM.
You can purchase DIMMs from various vendors. Be sure they
meet the following requirements.
DRAM type
Memory size
Type
Clock frequency
CAS Latency
Height
* SPD stands for Serial Presence Detect, a chip residing on the memory module
that contains information about the size, speed, and other specifications of
the memory as well as manufacturer information that can be retrieved by
the motherboard through electronic signals.
22
Installing Options
Synchronous Dynamic RAM Dual In-line
Memory Module (SDRAM DIMM)
64, 128, 256, or 512 MB
168-pin type, 64 bit, with SPD*
100 MHz or higher (10 ns or less)
CL=2
Less than 40 mm