Archer SR9 Kurulum Operasyon ve Bakım

Kontrolör Archer SR9 için çevrimiçi göz atın veya pdf Kurulum Operasyon ve Bakım indirin. Archer SR9 6 sayfaları. Automatic switchover

Model SR9 Automatic Switchover

General:

The Archer Instruments Model SR9 Automatic Switchover vacuum regulator

is designed for use in pairs, with one unit connected to an on-line gas cylinder / gas

source and the other connected to a standby cylinder / gas source. The SR9 can also be

used in the same way with multiple units connected to multiple standby gas sources.

Safety:

When working with chlorine, always use caution and follow applicable safety

procedures. General safety considerations:

* Store Chlorine separately from Ammonia.

* When using chlorine, avoid locations that expose the cylinder and equipment to direct

sunlight.

* Do not apply heater or heat source directly to chlorine cylinders.

* 150lb (upright) cylinders: Always keep cylinders upright and ensure the steel valve

cap is in place when moving cylinders. Once cylinder is in place, a safety chain should be

used to secure the cylinder.

* Ton Containers: Use appropriate handling equipment when moving ton containers.

When readying ton container for use, ensure valves are aligned vertically. The top valve

accesses gaseous chlorine and the bottom valve accesses liquid chlorine. The bottom

valve should never be touched unless your system employs a chlorine heat exchanger

(evaporator) designed expressly for use with liquid chlorine. When drawing gas from ton

containers an appropriate ton container adapter & drip leg must be used (also available

from Archer Instruments).

Archer Instruments, LLC

Installation, Operation & Maintenance