Epson C203011-B - Stylus Color 3000 Inkjet Printer Manuel - Sayfa 8
Yazıcı Epson C203011-B - Stylus Color 3000 Inkjet Printer için çevrimiçi göz atın veya pdf Manuel indirin. Epson C203011-B - Stylus Color 3000 Inkjet Printer 13 sayfaları. Epson stylus color 3000: product information
Ayrıca Epson C203011-B - Stylus Color 3000 Inkjet Printer için: Hızlı Kurulum Kılavuzu (21 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
EPSON Stylus COLOR 3000
4. If you want to print the default-setting instructions in
another language, press the
the
and
B
Ink Out
Yellow
your control panel indicate the language you want to use.
English
Both lights off
French
Ink Out
and
Ink Out
German
Ink Out
and
Ink Out
Italian
Ink Out
and
Ink Out
Spanish
Both lights on
Portuguese
Ink Out
and
Ink Out
5. Press the
button. The printer prints instructions on
Pause
changing the default settings.
6. Follow the instructions on the sheets to change the
necessary settings. Your changes remain in effect until you
change them again. (To exit without changing any settings,
press the
button.)
Pause
7. When you're finished changing settings, press
you need to eject any loaded paper. Then turn off the
printer to exit default-setting mode.
8. Wait five seconds, then turn on your printer to resume
printing normally.
Installing an Ink Cartridge for the First
Time
1. Press the
button to turn on the printer. The
P
Operate
light and all four
Operate
light begins flashing.
Pause
2. Open the ink cartridge compartment by pressing the top of
the ink compartment door. You see four slots for the ink
cartridges.
8 - EPSON Stylus COLOR 3000
U
button until
Micro Adjust
lights on
B
Ink Out
Magenta
on
B
Yellow
off
B
Magenta
B
flashing
Yellow
off
B
Magenta
off
B
Yellow
B
on
Magenta
flashing
B
Yellow
B
on
Magenta
Load/Eject
lights come on and the
Ink Out
3. Open the ink cartridge packages.
4. Insert the cartridges, foil plug first, arrow on top, into the
slots. Insert cartridges in the following order: yellow,
magenta, cyan, and black. Each cartridge is "keyed" so it can
be inserted into the correct slot. Push each cartridge all the
way into its slot until it meets resistance and the
corresponding ink cartridge light turns off.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
if
5. Close the ink compartment door. The printer begins
charging the advanced ink delivery system.
Charging takes up to 10 minutes, with the
flashing until it's finished then the
Do not turn off the printer or interrupt this important
process or you'll use up more ink than necessary.
Caution:
Never turn off the printer when the Pause light is
flashing. However, if the Pause light is still flashing
after 15 minutes and the printer is not moving or
making noise, you may turn off the printer.
6. When the
Pause
process is finished. Press the
light.
Pause
5/97
Pause
light stays on.
Pause
light stops flashing, the ink charging
button to turn off the
Pause
light