Aybey Elektronik ALYA Series Kurulum Kılavuzu - Sayfa 5
Monitör Aybey Elektronik ALYA Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Aybey Elektronik ALYA Series 5 sayfaları. Tft display serial communication lop
Sayfayı Yazdır
4- Firmware Update
The software of TFT display can be updated by using SD card. The procedure for
updating the software is as follows:
Save the new file must into the SD card.
Switch off the power of LOP.
Press UP and DOWN buttons simultaneously and hold them pressed while
switching on LOP
When the update screen shown below appeares release the buttons.
Select the file you want to upload (with ".clt" extension) on the update screen
by using UP and DOWN buttons. Press ENT button to upload highlighted file for
update.
Warning : During the update process, never turn off the power.
After update process has been completed, the LOP will be restarted.
When the LOP is restarted, ID number and software version will appear on the
screen.
5-Caution
4.1 Use only special stainless steel cleaners to clean the panels.
4.2 Do not use any detergent or acids to clean panels.
4.3 Avoid to contact any liquid to the LOP.
4.4 In case of an electrical failure, switched off the LOP and contact with Aybey
Elektronik Technical Service.
4