Architectural Mailboxes elephantrunk 6950 Manuel - Sayfa 2
Saklama Kutusu Architectural Mailboxes elephantrunk 6950 için çevrimiçi göz atın veya pdf Manuel indirin. Architectural Mailboxes elephantrunk 6950 2 sayfaları. Parcel drop
Sayfayı YazdırAlways home. Even when you're not.
elephantrunk
parcel drop
quick start instructions
1
Install Batteries (4xAA - not included):
a
Using a Master key,
place the lock in
unlocked (vertical)
position.
d
Replace the battery cover, place the lock in locked (horizontal) position, and remove Master Key.
2
Reset your Code:
a
With Master Key in unlocked (vertical) position,
press the red programming button.
b
Within 60 seconds, enter a new 4-digit code using 0
through 9, then press #.
Test your new code by closing the lid (it does not need to
be locked but the lid must be closed) and input your code
followed by the # key.
If your code works, the keypad will show the green light
flash twice with two beeps. If your code does not work, the keypad will display the red light and
have a long beep sound. If this occurs, try to reset your code again.
3
Apply Unique Serialized Barcode:
For future compatibility with virtual signature
delivery systems, attach the barcode to the
location shown on the inside of the lid.
4
Your elephantrunk is ready to use. Just
put it in standby mode by closing the lid
and entering your code, then let it wait
for a delivery.
© 2017, Architectural Mailboxes, LLC
Use the Master Keys to open the unit as well as access other features that need to
be protected, such as reprogramming the keypad code, replacing batteries and
changing modes of operation. MAKE SURE YOU KEEP THESE KEYS IN A SAFE
PLACE AND DON'T GIVE THEM OUT TO OTHERS.
b
Remove this screw to access the
battery compartment.
Rear View
of Lock Assembly
Rev. A
TM
by
R
TM
c
Insert batteries as shown.
Rear View
of Lock Assembly
Model 6950